Wire Rope Clips: Uses, Installation and Important Safety Considerations

At CML SARL we supply Wire rope clips, also known as wire rope clamps or U-bolt clips, are mechanical fittings used to secure the end of a wire rope, typically when forming an eye or termination.

---

Wire rope clips, also known as wire rope clamps or U-bolt clips, are mechanical fittings used to secure the end of a wire rope, typically when forming an eye or termination. CML SARL supplies wire rope clips and clamps as part of its rigging accessories and lifting equipment range. What Is a Wire Rope Clip? A conventional U-bolt wire rope clip generally consists of: A U-shaped bolt A saddle Nuts The components clamp two sections of wire rope together. Wire rope clips are available in different materials, sizes and designs depending on the application. Where Are Wire Rope Clips Used? Applications can include: Wire rope terminations Rigging assemblies Marine applications Temporary wire rope connections Industrial securing systems General cable applications However, not every wire rope clip is suitable for overhead lifting. For example, some DIN 741 clips are specifically identified by suppliers as not for lifting. This distinction is extremely important. How Does a Wire Rope Clip Work? The clip compresses the wire rope sections together. For an eye termination, the rope is normally formed around a suitable thimble and the clips are installed along the rope according to the manufacturer's instructions. The correct orientation, number of clips, spacing and tightening torque are critical. Why Use a Wire Rope Thimble? A thimble provides a shaped bearing surface inside the eye of the wire rope. It helps reduce direct contact between the rope and the connection poin...